11" Front SS4+ Deep Stage Drag Race Brake System

This system features the S4 4-piston caliper mounted to a 11" 2 piece slot, drill, zinc plated rotor. Quality bearings used, along with NAS high grade stainless hardware for our 2-piece rotor. The SS4+ is designed just like Baer's larger systems, but in a smaller package for 15" wheels. This is the first drag race system designed specifically for heavy, fast cars that might see street use. Rotors are vented, and calipers have dust seals. Hubs come with ARP 1/2"x20 race studs.

Drag Race systems come standard in Clear and Fire Red caliper colors.

NOTE: This system comes equipped with a high friction pad that is optimized for drag race applications. These pads often produce more dust and noise.

| Rotor Size/Type:
11" 2-piece (directionally vented)

| Piston Count:
4 piston, 1.75" Pistons

| Pad Type:
Common 4 piston pad shared on the aftermarket (#DR1 or Hawks #HB100)

NOTE: This system comes with high friction pad optimized for drag race applictions.

| Minimum Wheel Size:
15" (Use template to verify fitment, link below)

| Includes:
Quality bearings, ARP Studs, Billet Dust caps, -3AN fittings with copper crush washers (no hoses). Does not include spindles.

| Notes: Designed to be used with 94-02 Mustang SN95 spindles and hubs (spindles and hubs not included). May require hub to be turned down to 5.75" for the rotor to fit. Requires the use of an aftermarket outer tierod end (such as Baer Adjustable Trackers). Some stock type outer tie rods will have interference with the rotor. Baer offers Trackers for all year Mustangs.