Blue Oval Performance store: , ,

14" Rear Extreme+ Brake System

This system features the 6S 6-piston Monoblock caliper mounted to a 14" 2 piece slot, drill, zinc plated rotor. Baer systems include stainless steel brake hoses as well as calipers that have D.O.T compliant dust and weather seals. Quality bearings used, along with NAS high grade stainless hardware for our pre-assembled 2-piece rotor. The 6S and 6R (R-Spec) calipers are Baer's Flagship offering, and are built out of a single piece of US sourced 2618 forged aluminum.

| Rotor Size/Type:
14" 2-piece

| Piston Count:
6 piston Monoblock

| Pad Type:
D1247 (also known as DR11)

| Minimum Wheel Size:
18" (Use template to verify fitment, link below)

| Includes:
Stainless braided brake hoses, Park Brake assembly. This is a GENERAL FIT rear, does not include park brake cables. If cables are needed, add them below and we will contact you.

| Notes:
Desiged to be used with Ford 9" small bearing. This system has a 5X4.5 and a 5X4.75 bolt circle.

| Additional Notes:

15/16" can be used Power or Manual. Customers that prefer softer pedal feel with less pedal effort use 15/16" for Power Brakes

1" with Power is based on good engine vacuum numbers, and that the booster is working corretly

Drag race applications with dual rear calipers should use a 1 1/8" Bore Remaster

Port Configuration is based off Drivers seat position. LP - Left port (Fender side), RP- Right Port (Motor Side)

Most all applications will use LP exit. Fox Mustangs (1979-1993) will use RP due to shock tower clearance

When purchasing a Remaster, ALL drop down menus must be selected to before adding the Remaster to your cart.




home \| products \| search \| checkout \| contact \| map \|\| UPS Tracking