These Oldsmobile remote filter adapters provide the necessary 1/2" NPT ports for installing remote filter lines as well as a 1/8” NPT port for plumbing an oil pressure sensor. They are made from billet aluminum and are black anodized to be durable and long lasting. Adapters mount using the factory mounting holes on the block.

These Pontiac remote filter adapters provide the necessary 1/2" NPT ports for installing remote filter lines as well as a 1/8” NPT port for plumbing an oil pressure sensor. They are made from billet aluminum and are black anodized to be durable and long lasting. Adapters mount using the factory mounting holes on the block.

This cast aluminum remote spin-on oil filter mount accepts Chevy Type spin-on filters (13/16"-16). Itis designed to withstand racing conditions, has 1/2" N.P.T. in and out ports and an extra 1/2" N.P.T. port which can be used for a temperature or oil pressure sender, or for an Accusump input. Left hand inlet and right hand outlet.

This cast aluminum remote spin-on oil filter mount accepts Ford type spin-on filters (3/4"-16). It is designed to withstand racing conditions, has 1/2" N.P.T. in and out ports and an extra 1/2" N.P.T. port which can be used for a temperature or oil pressure sender, or for an Accusump input. Left hand inlet and right hand outlet.

This transmission expansion tank features a petcock for draining excess fluid, a sintered bronze vent, and mounting flanges for easy panel mounting. It has a 1.5 pint capacity to meet NHRA & IHRA overflow requirements and is constructed from .100 aluminum. The tank size is 3-1/2" wide by 5-1/4" tall by 3" deep.

This cast aluminum filler neck is designed for cars where the engine sits higher than the radiator. These necks give you an easy fill point to ensure all the air is purged from the engine. It can also be used with a recovery system.

This cast aluminum bleeder water neck give you a place to bleed air out of the coolant system. It works with systems where an expansion tank is also used as a fill point and is mounted in a higher position than the engine.

This extended fill neck raises the water fill point 6" above the manifold, which is ideal for bleeding off air within the cooling system. 6061-T6 Billet aluminum construction for light weight and durability in racing environments. The fill tube is angled at 45-degrees to provide clearance for large air filters, scoops, etc. Includes a 1/8"NPT to 3/8" barbed fitting for plumbing of an expansion tank. Accepts standard radiator caps or our #81-016 and #81-030 or 81-116 Billet Cap. Designed for use with our #80-000 or similar filler necks.

1" Thick blended spacer for Holley 4150/4160.

The Pontiac Screen Windage Tray sandwiches between block and the pan. Made to be used with the 301-455 blocks and aftermarket pans that are deeper in the front than OE.

The Pontiac Pro style Windage Tray sandwiches between block and the pan. Made to be used with the 301-455 blocks and aftermarket pans that are deeper in the front than OEM.

*High volume performance upgrade for M-155HV *25% increase in volume over standard *Uses ¾” Press in Pickup Screen *Housing and cover are CNC machined and phosphate coated *Includes lower pressure spring to be used if lower pressure is desired, and intermediate shaft

Six pack 2-5/8" tall synthetic oil elements for our 4" oil filters.

Six pack 2-5/8" tall 1 micron fuel elements for our 4" and Marine fuel filters.

Six pack 2-5/8" tall 8 micron fuel elements for our 4" and Marine fuel filters.

These Power Steering Pump Mounts are for SBC long water pump flat & V-belt applications. They accept our power steering pump, late model GM pumps which use a remote reservoir (Cavalier, Celebrity, etc.) and other aftermarket pumps (Sweet, etc.). Designed to provide an easy way to mount a power steering pump. Ensures correct belt alignment and drive ratios with our pulleys. These mounts are CNC machined from billet aluminum and include all hardware.

These Power Steering Pump Mounts are for SBC long water pump flat & V-belt applications. They accept our power steering pump, late model GM pumps which use a remote reservoir (Cavalier, Celebrity, etc.) and other aftermarket pumps (Sweet, etc.). Designed to provide an easy way to mount a power steering pump. Ensures correct belt alignment and drive ratios with our pulleys. These mounts are CNC machined from billet aluminum and include all hardware.

This 1" Phenolic adapter that allows the Holley #R4412 2BBL carb to be mounted on 4BBL manifolds that have the standard Holley bolt pattern. These spacers are adjustable front to rear for fine tuning. Comes with all necessary hardware and has threads that are Heli-coiled.

This 1" Phenolic adapter allows the Holley R4412 2BBL carb to be mounted on the Q-Jet manifold 4BBL manifold. The mounting holes are slotted allowing front to rear adjustment for fine tuning. Comes with all necessary hardware and the threads are Heli-coiled.

These SBC tall steel valve covers have two 1-3/8" dia. breather tubes mounted inline with the bolts of the left cover. They come with a gold iridite finish and are tall enough to clear most stud girdles and aftermarket valve train assemblies.

SBC tall steel valve covers with two 1-3/8" dia. breather tubes mounted toward the front of the left cover to eliminate interference problems in some applications. These come with a gold iridite finish and are tall enough to clear most stud girdles and aftermarket valve train assemblies.

This billet aluminum tank can be used as either an overflow catch tank, or as a recirculating expansion tank. Lightweight compact design features removable screw in end caps with o-ring seals. Includes two 90 degree 5/16 barbed fittings, one straight 5/16 barbed fitting, a petcock drain plug , and a stainless steel mounting clamp. The tank is blue anodized with clear anodized end caps. Dimensions: 9" overall with 2-3/4 Dia

This billet aluminum tank can be used as either an overflow catch tank, or as a recirculating expansion tank. Lightweight compact design features removable screw in end caps with o-ring seals. Includes two 90 degree 5/16 barbed fittings, one straight 5/16 barbed fitting, a petcock drain plug , and a stainless steel mounting clamp. The tank is in raw aluminum finish with clear anodized end caps. Dimensions: 9" overall with 2-3/4 Dia

4" Dia. 6 Rib Flat Belt Crank & Water Pump Pulley. This two groove pulley is designed to be used as either a crank pulley, when used with one of our crank pulley mounts, or installed directly as a water pump pulley.

4" Dia. 6 Rib Flat Belt Crank & Water Pump Pulley. This two groove pulley is designed to be used as either a crank pulley, when used with one of our crank pulley mounts, or installed directly as a water pump pulley.