These billet aluminum water necks are designed for Pontiac engines. They are designed to swivel 360 degrees for maximum versatility in mounting and feature a 1.5” hose connection and all the necessary clearance for a thermostat. Stainless steel hardware is included.

These billet aluminum water necks are designed for Ford 429/460 & 351C engines. They are designed to swivel 360 degrees for maximum versatility in mounting and feature a 1.5” hose connection and all the necessary clearance for a thermostat. Stainless steel hardware is included.

*Anti-Cavitation version of the M10552 *Same as the 10552 with the addition of grooves machined in the body and cover. The grooves reduce cavitation effects in high RPM applications *Using this oil pump will reduce pressure at idle

*Anti-Cavitation version of the M10555 *Same as the 10555 with the addition of grooves machined in the body and cover. The grooves reduce cavitation effects in high RPM applications. *Using this oil pump will reduce pressure at idle

This 351W / 351C Windage tray mounting kit includes four accessory mounting main cap studs, nuts, washers and tray mounting nuts.

See Details for more information.

Recommended Accessories 98-002 - Replacement O-Ring Kit

This 15,000 BTU Oil cooler measures 1.5" x 5.75" x 11". It features brazed aluminum construction and a high flow clog resistant design. It is suitable for both engine and transmission cooling.

These SBC tall polished cast aluminum valve covers come plain, with no holes for the engine builder who wants to personalize their engines.

SB Ford tall polished cast aluminum valve covers come with no holes, for the engine builder who wants to personalize their engine. They come polished for an attractive appearance and are tall enough to clear most stud girdles and aftermarket valve train assemblies.

This lightweight aluminum catch tank has a 3/8" fitting on the top for a vent tube which is essential for evacuating pressure. Also comes with a 3/8" N.P.T. side fitting and bottom petcock. Comes with a mounting clamp and a weld bracket which allows for panel or tube mount. Dimensions: 9" overall with 3-1/4" dia. Replacement clamps ( #26-890 )

This 1" Phenolic adapter allows the Holley 500 carburetor to be installed on a stock Ford 2300 intake manifold when the EFI manifold is removed. Built from phenolic it provides the extra benefit of creating a heat barrior between the carburetor and the manifold.

This SBC high volume 3/4" inlet pressure balanced oil pump has been modified to provide a smooth continuous flow of oil through the full RPM range. By reworking the pump housing and providing feeder grooves, we bleed some of the high pressure back into the gears providing smoother operation and more constant pressure. This allows for the high RPM operation on a race engine and limits oil pump cavitation. Since it is designed for smooth operation at high RPM’s, the idling oil pressure can be up to 10 lbs lower than that of a standard oil pump.

This BBC high volume pressure balanced oil pump has been modified to provide a smooth continuous flow of oil through the full RPM range. By reworking the pump housing and providing feeder grooves, we bleed some of the high pressure back into the gears providing smoother operation and more constant pressure. This allows for the high RPM operation on a race engine and limits oil pump cavitation. Since it is designed for smooth operation at high RPM’s, the idling oil pressure can be up to 10 lbs lower than that of a standard oil pump.

These billet aluminum water necks are designed for Ford FE engines. They are designed to swivel 360 degrees for maximum versatility in mounting and feature a 1.5” hose connection and all the necessary clearance for a thermostat. Stainless steel hardware is included.

Pickup for Ford 4.6L/5.4L 2Valve 2WD and 4WD Trucks 16-780 Oil Pan

See Details for more information.

This CM filter is a 9" long two stage filter, with two separate filter elements for superior filtration. Oil is first directed through a fine screen stainless element before being passed through a synthetic fiber element. The two stage filter combines the superior filtration qualities of the synthetic fiber media with the ease of inspection of the stainless screen element.

This CM Marine spin-on fuel filter is 11/16"-16 thread for Marine Power Inc. Mercruiser, and Volvo - Penta applications. It is a direct replacement upgrade for a many applications. It has a 6-1/4" long by 3" diameter billet aluminum body with a water collection chamber and petcock drain. The housing is blue anodized with a clear anodized end cap and uses replaceable 2-5/8" long 8 micron elements.

This CM Marine spin-on fuel filter is 16MM x 1.5 thread. for Volvo-Penta applications. It is a direct replacement upgrade for many applications. It has a 6-1/4" long by 3" diameter billet aluminum body with a water collection chamber and petcock drain. The housing is blue anodized with a clear anodized end cap and uses replaceable 2-5/8" long 8 micron elements.

This CM Marine spin-on fuel filter is 1"-12 thread for OMC applications. It is a direct replacement upgrade for many applications. It has a 6-1/4" long by 3" diameter billet aluminum body with a water collection chamber and petcock drain. The housing is blue anodized with a clear anodized end cap and uses replaceable 2-5/8" long 8 micron elements.

This dragster scoop mount provides an easy way to mount a scoop in applications using Holley 4500 carburetors. It is designed to be used with scoops with a base mesurement of 22” x 13-3/4” Constructed using .100” tig welded aluminum.