Boss style front sump replacement oil pans. Fits most Front Sump Production chassis except Mustang II.

Front sump replacement oil pans. Fit most Front Sump Production chassis except Mustang II.

This External Oil Pressure Adjuster is for -12 AN oil fittings, -10 AN relief line fitting. This adjuster by PETERSON FLUID SYSTEMS is an excellent tool for fine tuning a wet sump oiling system. It is designed for the serious engine builder who wants to be able to adjust oil pressure remotely. Requires modifications to internal oil pump bypass system and installation of an oil return line. To be tied into the filter feed line of a remote filter.

This External Oil Pressure Adjuster is for -10 AN oil fittings, -10 AN relief line fitting. This adjuster by PETERSON FLUID SYSTEMS is an excellent tool for fine tuning a wet sump oiling system. It is designed for the serious engine builder who wants to be able to adjust oil pressure remotely. Requires modifications to internal oil pump bypass system and installation of an oil return line. To be tied into the filter feed line of a remote filter.

This billet aluminum spin-on filter mount is designed to install under the pan rail of our LS1 pans. The mount uses the same 13/16 -16 thread filter nipple as stock to accept standard LS1 filters and features o-ring seals between the pan and the adapter.

18" high Tank: 13" tall, 1.5 Qt. This tank is designed to be used as a dual purpose vaccum pump and dry sump pump breather tank.

Billet aluminum mounting brackets for 4-1/4" Dia. Accusumps. Mounting brackets are required for all Accusumps to provide the proper support at the end caps to ensure the tube does not become distorted. These billet aluminum mounting clamps not only provide that support but also offer an attractive presentation. Sold in sets of two.

Lightweight Aluminum Power Steering Tank for applications where a remote reservoir is used. The tank is 3-1/4" in dia. 24oz and 8" high including the top. The bottom outlet is 1/2" N.P.T. and the return line fitting is 3/8" N.P.T. Baffled for better fluid control and comes with a heavy duty stainless steel mounting clamp. Can be used with our power steering reservoir tank fittings. Recommended or related parts #77-211 Aluminum power steering pump and pulley.

This lightweight water neck is machined from billet aluminum. A compact modular design allows the body to be flipped so that the 1.5" hose outlet fitting can face left or right. Features a flange filler top which accepts a standard radiator cap, top and bottom o-ring seals, 1/2" N.P.T. rear port for temperature sender, and two 3/8" N.P.T. ports for cooling lines. Includes hardware.

This lightweight aluminum expansion fill tank has a 1/2" N.P.T. bottom fitting and a 3/8" N.P.T. side fitting. 1-1/4 quart, has built in mounting brackets, accepts standard radiator caps. Recommended for applications where the top of the radiator is lower than the top of the engine. Mounting the tank higher than the engine insures a complete fill and provides an air space for expansion. Dimensions: 5-1/2" H x 4-1/2" W x 3" D

This versatile 2 Qt. aluminum tank features a vented fill cap, built in mounting tabs, and a clear tube sight gauge. Bottom and side ports allow this tank to be used as a recovery or an overflow catch tank. Includes two 5/16” barbed fittings (one straight, one 90 deg.), one socket hex plug, and one petcock drain fitting. Dimensions: 9.75" H x 7" W (inc. bracket) x 4" D

This Coolant Expansion Coolant Tank is 2 Quart. Size: 8" Tall, 5" Wide, 4" Deep Side Port: 1/2" N.P.T. Bottom Port: 1/2" N.P.T. This Canton expansion tank is built with .100" thick aluminum and has a billet aluminum neck with a barbed overflow fitting and accepts standard radiator caps.

5.5" Dia. Two Groove V-Belt Crank Pulley with a 2.75" Dia. Inner Groove for Power Steering drive. For SBC long water pump high RPM applications.

5.5" Dia. Two Groove V-Belt Crank Pulley for SBC Long Water Pump systems, great for street or track.

This SBC rear main seal adapter converts ’86 and newer blocks with one piece rear main seals to accept an older style two piece seal crank shaft. The adapter is essential when installing an early style (pre-’86) crankshaft into ’86 & newer blocks. When using this adapter an oil pan for a pre-86 block with a right side dipstick must be used. Made from Billet aluminum, hardware included.

7" Dia. Two Groove Water Pump V-Belt Pulley for SBC long Water Pump systems. This water pump pulley is designed with dual mounting patterns for both Chevy and Ford installation.

This billet aluminum remote spin-on filter mount accepts Chevy type spin-on filters (13/16"-16). It is designed for use in high performance applications. Includes two 1/2" N.P.T. in-ports and two 1/2" N.P.T out-ports. It can be plumbed right to left or left to right, for many plumbing options. Unused ports can be used for a temperature or oil pressure sender, or for Accusump input.

This billet aluminum remote spin-on filter mount accepts Ford type spin-on filters (3/4"-16). It is designed for use in high performance applications. Includes two 1/2" N.P.T. in-ports and two 1/2" N.P.T out-ports. It can be plumbed right to left or left to right, for many plumbing options. Unused ports can be used for a temperature or oil pressure sender, or for Accusump input.

5.875" Dia. Two Groove V-Belt Water Pump Pulley for SBF & SBC Short Water Pump systems. This water pump pulley is designed with dual mounting patterns for both Chevy and Ford installation.

5.875" Dia. Two Groove V-Belt Water Pump Pulley for SBF & SBC Short Water Pump systems. This water pump pulley is designed with dual mounting patterns for both Chevy and Ford installation.

5.875" Dia. Two Groove V-Belt Water Pump Pulley with 4.5" Nose Drive for SBF & SBC Short Water Pump Systems. This water pump pulley is designed with dual mounting patterns for both Chevy and Ford installation.

Upgrade replacement for stock '03-'04 COBRA super charger tank. Aluminum construction provides increased strength and capacity over the plastic stock tank. Accepts an aftermarket pressure cap.

Supercharger Coolant Tank for 03-04 Mustangs. Features billet stock style neck, which accepts your stock cap.

7" Dia. Two Groove Water Pump V-Belt Pulley for SBF & SBC Short Water Pump systems. This water pump pulley is designed with dual mounting patterns for both Chevy and Ford installation.