7" Dia. Two Groove Water Pump V-Belt Pulley with 4.5" Dia. Nose Drive for SBF & SBC Short Water Pump Systems. This water pump pulley is designed with dual mounting patterns for both Chevy and Ford installation.

Size: 3-1/4" Dia. 11-1/4" high. Tank: 7" tall, 24 oz. Ports Side: 3/8" N.P.T. Bottom: 3/8" N.P.T. Silver Powder Coated This Breather Catch Tank is Silver Powder Coated and comes with a petcock, a standard 1-3/8" breather, a stainless steel mounting clamp for panel mounting and a weld-on bracket which allows for roll bar mounting.

Size: 3-1/4" Dia. 9-1/4" high Tank: 5" tall, 16 oz. Ports Side: 3/8" N.P.T. Bottom: 3/8" N.P.T. This Breather Catch Tank is Silver Powder Coated and comes with a petcock, a standard 1-3/8" breather, a stainless steel mounting clamp for panel mounting and a weld-on bracket which allows for roll bar mounting.

This power steering tank has a 3-1/4" diameter and 24oz and 8" high. It uses a -10 AN bottom outlet and a -6 AN for the return fitting. The tank is also baffled for better fluid control and comes with a heavy duty stainless steel mounting clamp.

This aluminum coolant tank for 78-88 G bodies is a direct bolt-in upgrade for the factory coolant expansion/fill tank. It offers increased strength and an improved look over the stock tank. Tank features external sight guage and vented cap.

This '85-'87 Buick Grand National coolant recovery / fill tank features .100 aluminum construction, a vented fill cap, and is designed to fit and install in the same location as stock.

This versatile 4 Qt. aluminum tank features a vented fill cap, built in mounting tabs, and a clear tube sight gauge. Bottom and side ports allow this tank to be used as a recovery or an overflow catch tank. Includes two 5/16” barbed fittings (one straight, one 90 deg.), one socket hex plug, and one petcock drain fitting. Dimensions: 10.25" H x 8.75" W (inc. bracket) x 4" D

Stock replacement oil pans. Fits all Pontiac V8 in production chassis

Cobra Jet Style front sump replacement oil pans. Fits most Front Sump Production chassis except Mustang II.

This aluminum Mustang coolant tank is a direct bolt-in replacement for '05 and Up V-8 Mustang's. Offers increased strength and an improved look over the factory tank. The billet aluminum filler neck accepts an aftermarket 16 p.s.i pressure cap.

This ‘05-up V8 Mustang coolant expansion / fill tank features a billet stock style neck, which accepts your stock cap.

Aluminum supercharger tank designed to replace the plastic supercharger tank used in 05-09 Roush supercharged Mustangs and in the Roushcharger supercharger kit for 05-09 Mustangs. It features billet aluminum hose connections and a stock style billet aluminum threaded neck, which accepts your stock cap.

This tank is an aluminum replacement for the plastic tank that is used to relocate the coolant tank in Vortech and Paxton supercharger systems. Fits in the same location and mounts in the same way as the plastic tank that comes with the Vortech and Paxton systems, but offers the durability, heat resistance, and heat dissipation of aluminum. Tanks come matte, but can be polished for a custom show ready look.

Size: 3-1/4" Dia. 11-1/4" high Tank: 7" tall, 24 oz. Side Port: -12 AN. Bottom Port: 3/8" N.P.T. (For vacuum pump applications) This Breather Catch Tank is Silver Powder Coated and comes with a petcock, a standard 1-3/8" breather, a stainless steel mounting clamp for panel mounting and a weld-on bracket which allows for roll bar mounting.

This power steering tank has a 3-1/4" diameter, a 32 oz capacity, and is 10" tall. It uses a -10 AN bottom outlet and a -6 AN for the return fitting. The tank is also baffled for better fluid control and comes with a heavy duty stainless steel mounting clamp.

This coolant recovery / fill tank offers increase strength and an improved appearance over the factory tank. It features .100 aluminum construction, a vented fill cap, and is designed to install in the same location as stock. Fits 81-'86 Jeep CJ's and '87-'95 Jeep Wranglers (YJ). Features: * .100 Aluminum Construction * Vented Fill Cap * Designed to replace stock tank with same mounting

This coolant recovery / fill tank offers increase strength and an improved appearance over the factory tank. It features .100 aluminum construction, a vented fill cap, and is designed to install in the same location as stock. Fits 97-'06 Jeep Wranglers (TJ). Features: * .100 Aluminum Construction * Vented Fill Cap * Designed to replace stock tank with same mounting

These SBC tall steel valve covers have a cross over breather assembly. This cross over has two 4" high breather stacks and come with a gold iridite finish and are tall enough to clear most stud girdles and aftermarket valve train assemblies. Connecting hoses and clamps are included.

This 289-302 Full main cap stud kit is for use with our Windage Tray. It includes four accessory mounting main cap studs, nuts, washers and tray mounting nuts.

These SB Ford tall cast aluminum valve covers are designed for circle track racing. The left cover has two 1-3/8" breather stacks.

This aluminum coolant tank for 82-92 F bodies is a direct bolt-in upgrade for the factory coolant expansion/fill tank. It offers increased strength and an improved look over the stock tank. Tank features vented cap.

Pickup for Kit Car 15-794 Oil Pan

This aluminum integrated power steering tank creates a simpler and lighter power steering system by eliminating the need for a remote tank. The tank features an internal baffle and vented cap. It is designed to mount to out #77-210 compact power steering pump.

This tank is 24oz and is designed with a feed port that steps from .750" to .615" to mount to those power steering pumps. Canton’s pump mounted power steering tanks are designed to replace the stock pump mounted plastic tanks. Built out of .100" aluminum these tank provide a stronger more reliable better looking tank and eliminating the need for a remote tank. The tank features an internal baffle, vented cap, and a -6 AN return line port. Our pump mounted tanks are designed to work with pulleys designed for pump mounted tank applications.

This tank is a 32 oz. extra capacity tank and is designed with a feed port that steps from .750" to .615" to mount to those power steering pumps. Canton’s pump mounted power steering tanks are designed to replace the stock pump mounted plastic tanks. Built out of .100" aluminum these tank provide a stronger more reliable better looking tank and eliminating the need for a remote tank. The tank features an internal baffle, vented cap, and a -6 AN return line port. Our pump mounted tanks are designed to work with pulleys designed for pump mounted tank applications.