1/2" N.P.T. to -6 AN, aluminum adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

1/2" N.P.T. to -8 AN, aluminum adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1/2" N.P.T. to -10 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 3/4" N.P.T. to -16 AN steel adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1 foot -8 Stainless Steel Braided hose is a C.P.E. synthetic rubber tube bonded with a woven nylon braid and covered and secured with a 308 stainless steel outer braid. Made to resist extreme heat, abrasion and corrosion. Operating temperature is from -40 to +350 deg.. F. and can withstand working pressures up to 1000 PSI. For use with hydrocarbon and alcohol based fuels, motor oils, and coolant.

This aluminum swivel straight hose end fits -6 hose onto 37 deg. female -6 AN fittings. It is for use with our stainless steel braided hose. It features one piece billet tube construction, viton o-rings, and blue and red coloring.

-16 AN Male Weld in Fitting, Steel.

This brass push in & lock hose end fits -10 hose onto 37deg. female -10 AN fittings. This is the required hose end for our blue C.P.E. racing hose. It is designed for easy push-on installation and provides a secure locking fit rated to 250 psi when used with our C.P.E. racing hose. (sold as 2 pack)

Our carburetor mounting studs are made to be screwed into the intake with an allen wrench. By installing studs into your intake you eliminate the common problem of pulling the threads out each time you reinstall the carb. The mounting kit comes with a set of 4 stainless steel studs and 4 locking flange nuts.

This 1 foot -10 Stainless Steel Braided hose is a C.P.E. synthetic rubber tube bonded with a woven nylon braid and covered and secured with a 308 stainless steel outer braid. Made to resist extreme heat, abrasion and corrosion. Operating temperature is from -40 to +350 deg.. F. and can withstand working pressures up to 1000 PSI. For use with hydrocarbon and alcohol based fuels, motor oils, and coolant.

This 1 foot -12 Stainless Steel Braided hose is a C.P.E. synthetic rubber tube bonded with a woven nylon braid and covered and secured with a 308 stainless steel outer braid. Made to resist extreme heat, abrasion and corrosion. Operating temperature is from -40 to +350 deg.. F. and can withstand working pressures up to 1000 PSI. For use with hydrocarbon and alcohol based fuels, motor oils, and coolant.

This aluminum swivel straight hose end fits -8 hose onto 37 deg. female -8 AN fittings. It is for use with our stainless steel braided hose. It features one piece billet tube construction, viton o-rings, and blue and red coloring.

1-1/16" -12 AN Aluminum Port Bung.

BBC Stroker Oil Pan Allen Bolts.

This Brass “T” adapter is 1/2" N.P.T. to -10 AN. It can be used with our remote oil filter adapters, to connect an Accusump.

This fuel filter seal kit includes all of the seals used in a CM in-line fuel filter.

These SBC Phenolic fuel pump insulators are made to take the place of the steel plate that is between the fuel pump and the block on the SBC. The insulator will limit the transfer of heat from the block into the fuel pump, therefore keeping the fuel passing through it cooler.

This universal Phenolic fuel pump insulator works with all domestic V8’s except Ford Clevelands and Oldsmobiles. The Phenolic material will limit the transfer of heat from the block into the fuel pump, therefore keeping the fuel passing through it cooler. It installs easily between the fuel pump and the mounting boss on mechanical fuel pumps.

20mm Oil Level Plug for 15-240 and 15-244 oil pans. It includes a copper washer which is far superior to the standard plastic washers.

This SBC, AMC Oil Pan Stud Kit makes the installation of the oil pan easier. The studs hold the gasket in place while installing the pan and helps for pan alignment.

This 1/2" N.P.T. to -12 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This fuel filter seal kit includes all of the seals used in a CM remote fuel filter.

Aluminum block off plate for intake manifolds. Fits intake manifolds with standard 4150/4160 (square bore) carb. patterns.

Aluminum block off plate for intake manifolds. Fit intake manifolds with standard 4500 (Dominator) carb. patterns.

Replacement Screen.