#24-260 Manual Accusump Ball Valve with female 1/2" N.P.T. ends. Comes with 1/2" N.P.T pipe nipple for installation to the Accusump.

Universal Hooded breather with 180 degree shield. This Chrome plated valve cover breather is made to work with a 1-3/8" breather tube. The filter element uses a woven cotton fabric enclosed in a wire mesh. The cotton fiber holds oil which traps dirt particles without restricting the air flow. Washable for long life. One to a package.

SBC Aluminum Exhaust block off plates. Fit SBC cylinder heads with standard exhaust pattern. Sold in pairs.

SBF Aluminum Exhaust block off plates. Fit SBF cylinder heads with standard exhaust pattern. Sold in pairs.

BBF Aluminum Exhaust block off plates. Fit 429/460 cylinder heads with standard exhaust pattern. Sold in pairs.

SBF 351C Four Piece Oil Pan Gasket With fibrous Compound Rails. NOTE: Our Ford One Piece & Four Piece Oil Pan Gaskets are NOT Interchangeable. The Ford Oil Pan Stamping That Is Used With A Four Piece Oil Pan Gasket Is Different Than The Stamping That Is Used With The One Piece Oil Pan Gasket. The Four Corners Where The Oil Pan Turns Down To Go Around The Timing Cover Or The Rear Main Cap Are Sharper On The Four Piece Gasket Oil Pan Than The One Piece Style Oil Pan. For A proper Seal You MUST Use The Gasket Style That Is Appropriate For The Oil Pan You Are Using.

These T-shirts are made from heavy weight 100% preshrunk cotton.

These T-shirts are made from heavy weight 100% preshrunk cotton.

These T-shirts are made from heavy weight 100% preshrunk cotton.

These T-shirts are made from heavy weight 100% preshrunk cotton.

This aluminum swivel straight hose end fits -12 hose onto 37 deg. female -12 AN fittings. It is for use with our stainless steel braided hose. It features one piece billet tube construction, viton o-rings, and blue and red coloring.

These SBC block off plates will block off the fuel pump opening whenever a mechanical fuel pump is not used. They are made from 1/4" billet aluminum and are black anodized to be durable and long lasting. Stainless steel hardware is included.

These BBC & Ford block off plates will block off the fuel pump opening whenever a mechanical fuel pump is not used. They are made from 1/4" billet aluminum and are black anodized to be durable and long lasting. Stainless steel hardware is included.

These 69+ Pontiac block off plates will block off the fuel pump opening whenever a mechanical fuel pump is not used. They are made from 1/4" billet aluminum and are black anodized to be durable and long lasting. Stainless steel hardware is included.

These Oldsmobile and Cadillac block off plates will block off the fuel pump opening whenever a mechanical fuel pump is not used. They are made from 3/8” billet aluminum and are black anodized to be durable and long lasting.

Single 4-5/8" tall synthetic oil elements for our 6" oil filters.

Single - 2-1/4" tall synthetic 8 micron oil element for our 3.4" oil filters.

Single 4-5/8" tall 8 micron fuel element for our 6" fuel filters.

Alignment bushing for installing Mandrel Style Crank Pulley (#75-110) when not using a mandrel.

Drive mandrel pulley spacer.

BBC FULL LENGTH SUMP MARINE PAN 1 PIECE SEAL. Stock replacement.

This SBC Crank Scraper allows you to maximize the horsepower savings in the oil system by removing the oil from the rotating assembly. The crank scraper mounts between the pan and the block and extends out toward the crankshaft. As the crankshaft spins the crank scraper catches oil spray and returns it to the bottom of the pan. This reduces windage around the crankshaft and frees up horsepower. Our crank scrapers are notched for stock stroke and rod combinations so it will need to be trimmed for larger configurations.