Shock eye replacement urethane bushing kit, includes 4 bushings, enough for 2 shocks Includes 4 urethane bushings

Koni Non-adjustable STR.T Series shock, 1986-93Mustang 5.0L Suitable for stock location springs

Quad Shock, 1985-2004 solid-axle V8 Mustang axle damper
•Reduces the unwanted axle wind-up that causes wheel hop
•Direct replacement for OEM horizontal shock
•Gas pressurized
•Sold individually

1987-93 Mustang, Bilstein HD series shock for solid axle Mustang, with dust boot.

• Suitable for stock-location springs. See chart below for spring recommendations.
• Why install SN95 shocks on a Fox chassis?

For more details and technical information, select "details" on the left.

Koni Non-adjustable STR.T Series strut, 1987-93Mustang 5.0L Suitable for stock location springs

Koni Single-Adjustable Sport Series shock (sold individually), 1987-04solid-axle equipped Mustang Suitable for both stock location springs and coil-over conversions.

H&R Sport Springs kits are H&R's number one selling product line. Enhance your Mustang's looks with a reduced fender well gap

Designed for responsive, tight handling and great performance Designed for high performance drivers who want the most out of their Mustang

Koni Single-Adjustable Sport Series strut (sold individually), 1987-93V8 Mustang Suitable for both stock location springs and coil-over conversions. See chart below for spring recommendations.

1987-04 Mustang, Bilstein HD series strut, with dust boot and internal bumpstop. Suitable for both stock-location springs and coil-over conversions.

1987-2004 Mustang, MM Sport series strut Intended for street-driven Mustangs with front coil-over spring rates of 350 lb/in and 400 lb/in

2 1/2 diameter tube, dual 4x8 mufflers, center in/out with 3" internal core, 3" single wall turn down polished stainless tips. Over axles not included. RACE APPLICATION!

Koni Double-Adjustable Sport Series strut (sold individually), 1987-93V8 Mustang Suitable for both stock location springs and coil-over conversions.

Rear Coil-Over conversion kit for Koni 30-Series shocks (solid axle). This kit comes with Hypercoil springs in your choice of spring rate. Consult your MM sales department for help choosing spring rates for your particular car and driving habits. This kit can be purchased without springs as a MMCO-6.

You will need to purchase our Racing Upper Shock Mounts for use with this kit. MMSM-3

Click on the Tech Info button below for more technical information on Coil-Over kits.

Koni Package of STR.T Non-adjustable struts & shocks. 1987-93V8 Mustang, solid axle (no IRS).

2 1/2" diameter tube, dual 4x8 mufflers, with adjustable flow tubes. 3" single wall slash cut polished stainless tips, stock location exit.

1987-93 Mustang, Bilstein HD series damper package for solid-axle Mustang, includes 2 Bilstein HD struts and 2 Bilstein HD shocks.
•Struts are suitable for both stock-location springs and coil-over conversions. See chart below for spring recommendations.
•Rear shocks are not suitable for a coil-over conversion. Order package number BIL-7.1 if a future rear coil-over conversion is a possibility.
•Includes V36-4138-H5 front struts.
•Includes B46-2148-H1 rear shocks.

Bilstein HD series damper package for solid-axle Mustang, includes 2 Bilstein HD struts and 2 Bilstein HD shocks, with integral progressive bumpstops.
•Struts are suitable for both stock-location springs and coil-over conversions. See chart below for spring recommendations.
•Rear shocks may be modified for a coil-over conversion by machining a groove in the shock body. Order package number BIL-7.1 (with its pre-grooved shocks) if a future rear coil-over conversion is a possibility.
•Includes V36-4138-H5 front struts
•Includes BE5-6418-H4 rear shocks

Bilstein HD series damper package for solid-axle Mustang, includes 2 Bilstein HD struts and 2 Bilstein HD shocks, with integral progressive bumpstops.

Included in this kit's price is a charge for grooving the rear shocks for a coil-over conversion. You can get a $20 discount if:

• You purchase a rear coil over kit along with this package.
• In the past you purchased a rear coil-over kit directly from us.
• You purchase a rear coil over kit directly from us at a later time.

If any of these situations apply, please note it in the "special instructions" field at checkout. We will confirm the situation and waive the grooving charge when we process your order.

• Struts are suitable for both stock-location springs and coil-over conversions. See chart below for spring recommendations.
• Rear shocks are suitable for a coil-over conversion, as a groove is machined into the rear shock body.
• Includes V36-4138-H5 front struts.
• Includes GBE5-6418-H4 rear shocks.

For more details and technical information, scroll down.

• Firm, yet good ride quality, as is expected of a performance car
• Bilstein struts and shocks are made with patented mono-tube technology
• Inverted strut design has very large strut shaft bushings for greater resistance to deflection from cornering loads, and protection of the oil seal
• High nitrogen gas pressure prevents oil foaming and resultant fading
• Monotube design has better heat dissipation than twin-tube dampers, keeps the oil cooler, and decreases heat-induced damper fade
• Velocity-sensitive valving improves ride quality
• Each Bilstein strut and shock is tested on a shock dyno
• The optimal 1994-04 design Bilstein rear shocks are grooved for coil-over conversions, and include an integral, progressive bump stop
• Bilstein struts and shocks include dustcovers
• MM Sport series and MM Race series dampers are better suited for more aggressive spring rates.
• Why install SN95 shocks on a Fox chassis?

Tech
Heavy Duty (HD) Bilsteins work very well in street applications with a variety of both conventional springs and coil-over conversions. They are designed to deliver the best possible ride quality coupled with impressive street performance. The HD series dampers were not designed for use with overly aggressive spring rates, particularly in coil-over conversions. For dampers more suited to aggressive spring rates, see the MM Sport series and MM Race series dampers.

These HD series rear shocks have a groove machined in the shock housing to accept the MM rear coil-over conversion kit.

While they are non-adjustable, Bilstein's unique deflective-disc valve design instantaneously self-adjusts to changing road surfaces. Their performance does not degrade with age, usage, or heat, requiring no compensating manual adjustments as with other brands. Bilstein uses a patented mono-tube design that allows for a larger piston size than is possible with a twin-tube damper. The mono-tube design provides better heat dissipation to keep the damper's oil cooler, and decreases heat-induced damper fade. High-pressure nitrogen gas prevents oil foaming and fading. The unique inverted design of the Bilstein strut allows for very large strut shaft bushings, which are less prone to deflection. The inverted strut design also keeps the oil seal protected from the elements. Every Bilstein damper is tested on a shock dyno before leaving the factory to ensure quality.

All Bilstein struts and shocks include dustcovers suitable for use with conventional springs. Front coil-over applications require unique smaller dustcovers that are included with MM front coil-over conversion kits, and are also available separately.

Tech links

• Choosing the right damper
• What's a "damper"?
• Adjustable vs. non-adjustable dampers
• Matching spring rates with dampers
• Spindle swapping tech

2 1/2" diameter tube, dual 4x8 mufflers, with adjustable flow tubes. 3" single wall slash cut polished stainless tips, stock location exit.

1987-2004 Mustang, MM Sport series damper package for solid-axle Mustang, includes 2 MM Sport struts and 2 MM Sport shocks.

4-Piston Rear Kit 11-in Rotor Diameter 0.81-in Rotor Width Flange: 8.8 Ford Offset: 2.5 Rear Mounted Calipers