LINKAGE, 4 3/4 HEX GOLD ANODIZED

ROD END, 10/32" FEMALE LEFT HAND CHROME

Fuel systems, pumps and injectors require cleaner fuel to achieve better combustion and lower emissions.

TOOL, DEGREE WHEEL

VALVE, BRIGGS 1.250" INTAKE

VALVE, BRIGGS 1.132" EXHAUST

VALVE, BRIGGS 1.440" INTAKE

VALVE, BRIGGS 1.300" INTAKE

VALVE, BRIGGS 1.375" INTAKE

VALVE, BRIGGS 1.000" EXHAUST

VALVE, STK INTAKE 1.125" BLUE-PRINTED

Fuel systems, pumps and injectors require cleaner fuel to achieve better combustion and lower emissions.

This is a vented replacement cap for our overflow catch tanks, recovery tanks, and power steering tanks that come with our 77-251 and 77-251V caps. It functions the same as the 77-251 and 77-251V but offers a different look. It you are not sure if the cap you are replacing is non-vented, check underneath the cap. A non-vented cap will have no vent hole underneath where a vented cap will have a small hole close to the center of the cap.

Fuel systems, pumps and injectors require cleaner fuel to achieve better combustion and lower emissions.

X-Bone Pair Packed Universal Hanger for 1/2" Graphite (Black)

X-Bone Pair Packed Universal Hanger for 3/8" Graphite (Black)

X-Bone Pair Packed Universal Hanger for 3/8" Yellow

Our carburetor mounting studs are made to be screwed into the intake with an allen wrench. By installing studs into your intake you eliminate the common problem of pulling the threads out each time you reinstall the carb. The mounting kit comes with a set of 4 stainless steel studs and 4 locking flange nuts.