SBF 289-302 Four Piece Oil Pan Gasket with Fibrous Compound Rails For All 289-302 Oil Pans Except: 11-600, 13-600 11-644, 15-620, 15-620S, 15-640, 15-644, 15-644S. NOTE: Our Ford One Piece & Four Piece Oil Pan Gaskets are NOT Interchangeable. The Ford Oil Pan Stamping That Is Used With A Four Piece Oil Pan Gasket Is Different Than The Stamping That Is Used With The One Piece Oil Pan Gasket. The Four Corners Where The Oil Pan Turns Down To Go Around The Timing Cover Or The Rear Main Cap Are Sharper On The Four Piece Gasket Oil Pan Than The One Piece Style Oil Pan. For A proper Seal You MUST Use The Gasket Style That Is Appropriate For The Oil Pan You Are Using.

ROCKER ARM, CS TW 1.52 3/8 ULTRA PRO MAG

ROCKER ARM,CS TW 1.52 7/16 ULTRA PRO MAG

ROCKER ARM, CS TW 1.6 3/8 ULTRA PRO MAG

ROCKER ARM, CS TW 1.6 7/16 ULTRA PRO MAG

ROCKER ARM,348/409 CHEVY 1.7 ULT.PRO MAG

ROCKER ARM, FC FF 1.7 7/16 ULTRA PRO MAG

High-efficiency cabin air filters for passenger cars, light trucks, heavy trucks, buses and off-highway vehicles.

1990-'03 Chrysler A518-A618 (24-Spline, Except '03 48RE)

This 90 deg. 1/2" N.P.T. to -10 can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

Fuel systems, pumps and injectors require cleaner fuel to achieve better combustion and lower emissions.

TIMING CHAIN, CS, TC-489

Installs
•1994-95 Cobra Mustang brake master cylinder (15/16" bore; BMC-4)
Into
•1979-86 5.0L Mustang
Application
•Manual conversion (no power assist)
Fits proportioning valve
•Stock valve
Master Cylinder Brake Line Adapter Kit for MM Manual
Brake Conversion

Includes the brake hard lines and adapter fittings to install the MM Manual Brake Conversion Kit MMBAK-10 in a 1979-86 5.0L Mustang. The MM Manual Brake Conversion Kit relocates the brake master cylinder to a position 6.5" closer to the firewall because the power booster is eliminated. This new position requires changes to the brake hard lines. This adapter kit helps installation of the 1994-95 Cobra master cylinder. Fits both the stock brake proportioning valve/junction block, as well as the MM Proportioning Valve/Distribution Block Eliminator Kit MMBAK-6.

GUIDE PLATES, OLDS 5/16

GUIDE PLATES, OLDS 3/8

Fuel systems, pumps and injectors require cleaner fuel to achieve better combustion and lower emissions.