73-87 Pickup 2WD 1/2, 3/4, 1 Ton, 7-91 Full Size Blazer To '94, Suburban & Tahoe, 1/2 Ton 2WD

73-87 Pickup 2WD 1/2, 3/4, 1 Ton, 67-91 Full Size Blazer To '94, Suburban & Tahoe, 1/2 Ton 2WD

92-99 Full Size Blazer To '94, Suburban & Tahoe, 1/2 Ton 2WD

92-99 Full Size Blazer To '94, Suburban & Tahoe, 1/2 Ton 2WD

67-70 Full Size Blazer & Suburban, 1/2 Ton 4WD, 67-70 Pickup 1/2, 3/4, 1 Ton 4WD

67-70 Full Size Blazer & Suburban, 1/2 Ton 4WD, 67-70 Pickup 1/2, 3/4, 1 Ton 4WD

90-97 Accord, 92-00 Prelude

90-97 Accord, 92-00 Prelude

1/4" Thick 4-hole spacer for Holley 4150/4160 600+ CFM carbs.

Made from quality H60 steel

Ford OEM replacement

REAR END SPRING CUP PERCH (OFF SET)

1/2" -20 Magnetic Plugs & Washers, Package of 10. Magnetic Drain Plugs collect steel particles, keeping your oiling system clean and allowing you to check for problems. Each of our drain plugs include a copper washer which is far superior to the standard plastic washers.

1/2" Crank pulley spacer for use when a motor plate is installed behind the water pump and the crank pulley needs to be moved forward for alignment. Made to be used with 1" dia drive mandrel.

3/8" Crank pulley spacer for use when a motor plate is installed behind the water pump and the crank pulley needs to be moved forward for alignment. (Made to be used with 1" drive mandrel)

This filler neck flange accepts a standard radiator cap and fits Chevy intakes. It can also be used as a replacement top for our water necks.

1/4" Thick Q-Jet spacer. NOTE: Mounting Studs Will Work With Spreadbores But NOT With Q-Jets.

LABOR CHARGE, TO ASSEMBLE PUSHRODS

This billet weld on fill neck is ideal for use wherever a heavy duty, custom application filler neck is required. 6061-T6 billet aluminum construction, for durability in racing or street applications. Includes 1/8" NPT to 3/8" barbed fitting for plumbing of an expansion tank. Accepts standard radiator caps or our #81-016 and #81-030 or Billet Cap #81-116.

Ford small block 260-351W 4.7L/289