NOZZEL, STRGT PUMP DSCHG .031

-10 AN Male Weld in Fitting, Steel.

-12 AN Male Weld in Fitting, Steel.

3/8" N.P.T. Aluminum Bung with Plug.

1/2" N.P.T. Steel Bung with Plug.

1" N.P.T. Steel Bung & Plug for Use As An Inspection Plug.

This 3/8" N.P.T. to -6 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering

3/8" N.P.T. to -8 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1/2" N.P.T. to -12 AN steel adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1/2" N.P.T. to -12 AN, alum. adapter fitting can be used with our remote oil filter adapters, remote canisters, inline filters and power steering tanks. N.P.T. thread to AN 37 deg. flare.

This 1 foot -10 Blue C.P.E. Racing Hose has a rubber inner tube bonded to a reinforced textile braid and covered with blue synthetic rubber cover. Compatible with ols, fuels, and coolants. Designed to operate at 250 P.S.I. and 300F. Use with push in and lock ends.

This oil filter seal kit includes all the seals used in a Cast CM spin-on oil filter.

This oil filter seal kit includes all the seals used in the NEW Billet CM spin-on oil filters.

Our carburetor mounting studs are made to be screwed into the intake with an allen wrench. By installing studs into your intake you eliminate the common problem of pulling the threads out each time you reinstall the carb. The mounting kit comes with a set of 4 stainless steel studs and 4 locking flange nuts.

Our carburetor mounting studs are made to be screwed into the intake with an allen wrench. By installing studs into your intake you eliminate the common problem of pulling the threads out each time you reinstall the carb. The mounting kit comes with a set of 4 stainless steel studs and 4 locking flange nuts.

Replacement O-Ring kit for 22-520 and 22-521 Oil Input Adapter.

Replacement O-Ring kit for 22-550 SBC Oil Input Sandwich Adapter, 22-580 BBC Oil Input Sandwich Adapter, 22-540 & 22-541 SBC Remote Oil Cooler Sandwich Adapter, 22-542 & 22-544 BBC Oil Cooler Sanwich Adapter, 22-580 & 22-581 & 22-584 Chevy Billet Remote Oil Filter Adapters.

Replacement O-Ring kit. Use With Universal Oil Input Adaptrs 22-565, 22-566, 22-567, 22-568, & 22-569 also use with Universal Oil Cooler Adapters 22-545, 22-546, 22-547, 22-548, & 22-549 also use with 90 Degree Rotating Billet Remote Oil Filter Adapters 22-592, 22-593, 22-595, 22-596, 22-597, & 22-598.

ea

VALVE LOCKS, 11/32" FOUR GROOVE

HYDRAULIC LIFTER, CSV-6 (60 DEG)

LIFTER BOX, PROTECTOR BLACK